Covington 10 Inch Cork and Felt
The 10" Cork and Felt Glass Polisher is designed for cold-working glass to a high polish. The cork wheel combined with mildly abrasive pumice will pre-polish the work piece. The felt wheel combined with cerium oxide will bring the piece up to a high polish.
The arbor can be quickly disassembled (4 bolts) for pulley change or bearing inspection. A water valve and spray nozzle are built in for easy hookup. The water valve takes 1/4" OD plastic tubing for gravity water flow or 1/4" copper tubing for pressure systems.
Unit comes with one 10" x 2" cork wheel and one 10" x 2" felt wheel installed, dressed, and factory tested for balance. The felt wheel is installed with a metal side support. Wheels turn at 420 rpm to minimize polish powder loss, while a rim speed of 1,230 SFM creates the friction necessary for a brilliant finish.
- Back Plate with Spray Nozzle
- Powder Coated Pans Resist Rust
- Adjustable Sponge Bench to Minimize Splash
- Removable Side Panels for Easy Wheel Change
- Heavy Duty Ball Bearings, Neoprene Sealed and Greased for Life
- 1/3 hp high-torque motor
- Available in 220V, 60Hz
- Instructions included
- Manufacturer's warranty
- Weight: 92.00 Lb
- Width: 25.00 inches
- Height: 20.00 inches
- Depth: 25.00 inches