Auto-Tuning Ultrasonic Drill
Auto-Tuning Ultrasonic Drill
This Auto-Tuning Ultrasonic Drill is fully self-tuning which means that once you have properly attached the tool, you turn it on and adjust the power for the material you are machining.
This ultrasonic drill is designed to drill 0.5mm - 4.0mm holes, engrave (with a solid die) up to 8mm, and cut hard brittle materials by using ultrasonic energy. It will drill through precious stones, semi-precious stones, ferrite, silicon, glass, and ceramics.
This process is completed by the solid-state transducer transforming A/C current into mechanical vibration of about 20 KHz per second. Just feed the included 220 grit, graded silicon carbide abrasive onto the tool and work piece to drill or grind your piece, forming a hole that is the same shape as the tool.
Ultrasonic cutting is fast and clean. It usually outperforms diamond drilling tools and the consumable items are more cost effective. For example, a diamond drill bit usually costs between $1.00 and $5.50 and will last from 1/2 hole to 2 - 3 holes.
The drill tube for the ultrasonic costs from $.08 to $.24 each and lasts for 10 - 20 holes in agate and 50 - 100 holes in glass. A 1mm hole can be cut in an agate slab that is 4mm thick in about 60 seconds. The same can be done to glass in about 15 seconds.
This machine comes with:
- 5 horns
- A propane torch
- Flux
- Silver solder
- Tools
- Spare fuses
- 5 lb of 220 grit, graded silicon carbide
- Pump
- Water manifold
In addition, you will receive 10 meters (25 tubes per meter) of the sizes of your choice. The tubes come in 0.5mm, 0.8mm, 1.0mm, 1.5mm, 2.0mm, 2.5mm, 3.0mm, 3.5mm, 4.0mm, and 5.0mm.
The drill press option allows a vertical movement of about 1" ( 28mm) for controlled drilling into the workpiece. This tight sliding vertical movement allows you to mount your material in a fixture to get controlled drilling for beads and other products. It is especially useful when there is a need to drill from both sides. The option consists of the slide assembly and new extended mast.
Although the vast majority of machines sold by Lapidary Mart are made in America, these high-quality ultrasonic drills are imported from Taiwan. They have been counted as the most reliable ultrasonic on the market for the last 25 years.
**Please tell us what drill tube sizes you want with your order in the comments section of the order.**
Shipping
Free Shipping:
Free shipping offers (where indicated) apply to orders with a shipping address in the lower 48 states only. If you want a product that is over 70 lb shipped to Alaska or Hawaii, you will not be able to check out. Please contact us for a shipping quote and we will manually complete your order. We do not ship internationally.
Order Confirmation:
As soon as you place your order, you will receive an order confirmation email. This means that we have received your order in our system and pre-authorized your credit card for the purchase. When we receive your order, we reach out to our suppliers to confirm that it is available for shipment within the specified time frame.
If your item is on back-order or unavailable, we will reach out to you via email or phone and void the pre-authorization if you so desire. If your item(s) are available for shipment, we will process the charges and submit the order for shipment.
Order Shipment:
If your order is in stock and we process the charges to your credit card, it will ship within the following time frame according to brand, from the date of your order:
Lot-O-Tumbler: 2-5 business days
Gearloose, Lightning Lap: 1-2 business days
Crystalite: 2-5 business days
Gemini: 5-15 business days
Covington Engineering: 1-5 business days
Barranca Diamond: 4-6 weeks
We will send you tracking information within 24 hours of your order leaving the warehouse to the e-mail address you provided when checking out. If you do not receive tracking information from us within six business days of your order, feel free to follow up with us at sales@lapidarymart.com.
Damages:
Please inspect the packaging of your item(s) when they arrive, if you notice any damage you should make note of it when signing for delivery. If your item(s) do arrive damaged, please send photos to returns@lapidarymart.com and we will process an insurance claim on your behalf.
Auto-Tuning Ultrasonic Drill
This Auto-Tuning Ultrasonic Drill is fully self-tuning which means that once you have properly attached the tool, you turn it on and adjust the power for the material you are machining.
This ultrasonic drill is designed to drill 0.5mm - 4.0mm holes, engrave (with a solid die) up to 8mm, and cut hard brittle materials by using ultrasonic energy. It will drill through precious stones, semi-precious stones, ferrite, silicon, glass, and ceramics.
This process is completed by the solid-state transducer transforming A/C current into mechanical vibration of about 20 KHz per second. Just feed the included 220 grit, graded silicon carbide abrasive onto the tool and work piece to drill or grind your piece, forming a hole that is the same shape as the tool.
Ultrasonic cutting is fast and clean. It usually outperforms diamond drilling tools and the consumable items are more cost effective. For example, a diamond drill bit usually costs between $1.00 and $5.50 and will last from 1/2 hole to 2 - 3 holes.
The drill tube for the ultrasonic costs from $.08 to $.24 each and lasts for 10 - 20 holes in agate and 50 - 100 holes in glass. A 1mm hole can be cut in an agate slab that is 4mm thick in about 60 seconds. The same can be done to glass in about 15 seconds.
This machine comes with:
- 5 horns
- A propane torch
- Flux
- Silver solder
- Tools
- Spare fuses
- 5 lb of 220 grit, graded silicon carbide
- Pump
- Water manifold
In addition, you will receive 10 meters (25 tubes per meter) of the sizes of your choice. The tubes come in 0.5mm, 0.8mm, 1.0mm, 1.5mm, 2.0mm, 2.5mm, 3.0mm, 3.5mm, 4.0mm, and 5.0mm.
The drill press option allows a vertical movement of about 1" ( 28mm) for controlled drilling into the workpiece. This tight sliding vertical movement allows you to mount your material in a fixture to get controlled drilling for beads and other products. It is especially useful when there is a need to drill from both sides. The option consists of the slide assembly and new extended mast.
Although the vast majority of machines sold by Lapidary Mart are made in America, these high-quality ultrasonic drills are imported from Taiwan. They have been counted as the most reliable ultrasonic on the market for the last 25 years.
**Please tell us what drill tube sizes you want with your order in the comments section of the order.**
Shipping
Free Shipping:
Free shipping offers (where indicated) apply to orders with a shipping address in the lower 48 states only. If you want a product that is over 70 lb shipped to Alaska or Hawaii, you will not be able to check out. Please contact us for a shipping quote and we will manually complete your order. We do not ship internationally.
Order Confirmation:
As soon as you place your order, you will receive an order confirmation email. This means that we have received your order in our system and pre-authorized your credit card for the purchase. When we receive your order, we reach out to our suppliers to confirm that it is available for shipment within the specified time frame.
If your item is on back-order or unavailable, we will reach out to you via email or phone and void the pre-authorization if you so desire. If your item(s) are available for shipment, we will process the charges and submit the order for shipment.
Order Shipment:
If your order is in stock and we process the charges to your credit card, it will ship within the following time frame according to brand, from the date of your order:
Lot-O-Tumbler: 2-5 business days
Gearloose, Lightning Lap: 1-2 business days
Crystalite: 2-5 business days
Gemini: 5-15 business days
Covington Engineering: 1-5 business days
Barranca Diamond: 4-6 weeks
We will send you tracking information within 24 hours of your order leaving the warehouse to the e-mail address you provided when checking out. If you do not receive tracking information from us within six business days of your order, feel free to follow up with us at sales@lapidarymart.com.
Damages:
Please inspect the packaging of your item(s) when they arrive, if you notice any damage you should make note of it when signing for delivery. If your item(s) do arrive damaged, please send photos to returns@lapidarymart.com and we will process an insurance claim on your behalf.
